Aoc 203P Manuel d'utilisateur télécharger pdf (Page 6)

INSTALLATION INSTRUCTIONS

SWIVEL BASE

Install Remove

Figure 1 Installing and Removing the Swivel Base

POWERCORD

Power Source:

1. Make sure that the power cord is the correct type required in your area.

2. This LCD monitor has an External universal power supply that allows

operation in either 100/120V AC or 220/240V AC voltage area (No user

adjustment is required.)

3. Connect the power cord into your LCD monitor’s power input socket, and

then plug the other end into a 3-pin AC power outlet. The power cord may

be connected to either a wall power outlet or the power outlet socket on

your PC, depending on the type of power cord supplied with your LCD

monitor.

NOTES

A certified power supply cord has to be used with this equipment. The relevant

national installation and/or equipment regulations shall be considered. A

certified power supply cord not lighter than ordinary polyvinyl chloride flexible

cord according to IEC 60227 (designation H05VV-F 3G 0.75mm

H05VVH2-F2 3G 0.75mm

) shall be used. Alternative a flexible cord be of

synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm

)

shall be used.

41G2001-615-1A 英文

1 2 3 4 5 6 7 8 9 10 11 ... 21 22

Pas de commentaire

Aoc 203P Manuel d'utilisateur Page 6